I cannot have default routes in my main routing table. My DSL interface gets its IP and default gateway via DHCP and I can use VRF to write them into a separate table ( Putting DHCP default gateway in different routing table - #2 by c-po ): set vrf name vrf_dsl set vrf name vrf_dsl table 170 set inte…

16again June 6, 2023, 8:24pm 2

Assuming wg tunnel endpoint is VyOS: Packets are sourced from host itself, they don’t enter on eth0.
So use “set policy local-route” commands for dest=WIREGUARD-SERVER

Can VyOS put OSPF routes in a specific table?

How can I make my wireguard tunnel accessible via policy routing?