Hello, I use the command set interfaces ethernet etha vif b ip arp-cache-timeout 14400 to set net.ipv4.neigh.etha/b.base_reachable_time, but I can’t find the corrosponding command to set base_reachable_time on ipv6. set system sysctl parameter ... works for me, but when I restart vyos, it always…

The set system sysctl parameter net.ipv6.neigh.eth3/2.base_reachable_time_ms value 14400000 is attempting to be applied before the sub-interface is actually created. There’s a number of race conditions on boot like this that are causing issues right now. You can add the commands to the: “vyos-postco…

Apachez April 22, 2024, 4:43pm 4

What is the output of this command before and after you try to set this through VyOS config (without reboot in between)?

sudo sysctl -a | grep -i base_reachable_time_ms

How to set net.ipv6.neigh.etha/b.base_reachable_time in vyos