Hello,
I’m testing the upgrade procedure (for production hardware currently running Vyatta 6.4) by practicing it on AWS EC2 and following the instructions at http://vyos.net/wiki/Upgrade.
I started an EC2 instance from AMI “Vyatta Core 6.5 R1 x86_64 rev2 (ami-b754c48d)” and dowloaded the VyOS 1.1.6 image, I then set the VyOS image as the “Default” boot and rebooted, but the system still runs the old 6.5R1 image:
vyatta@vyatta:~$ show system image
The system currently has the following image(s) installed:
1: 1.1.6 (default boot)
2: Old-non-image-installation
vyatta@vyatta:~$ show version
Version: VC6.5R1
Description: Vyatta Core 6.5 R1
Copyright: 2006-2012 Vyatta, Inc.
Built by: [email protected]
Built on: Thu Nov 15 19:55:18 UTC 2012
Build ID: 1211151956-334fb58
System type: Intel 64bit
Boot via: disk
Hypervisor: Xen
Uptime: 00:09:50 up 1 min, 1 user, load average: 0.05, 0.03, 0.01Could someone explain to me what am I missing? The Upgrade page is specific to mention that the procedure should work on AWS just the same.
In case this matters, here is the version info for the production hardware I intend to upgrade:
vyatta@vyatta:~$ show version
Version: VC6.4-2012.05.31
Description: Vyatta Core 6.4 2012.05.31
Copyright: 2006-2012 Vyatta, Inc.
Built by: [email protected]
Built on: Thu May 31 07:27:15 UTC 2012
Build ID: 1205310732-388b16c
System type: Intel 64bit
Boot via: disk
HW model: PowerEdge R210 II
HW S/N: 6VR5D2S
HW UUID: 44454C4C-5600-1052-8035-B6C04F443253
Uptime: 00:15:09 up 1 day, 15:26, 1 user, load average: 0.00, 0.01, 0.05Thanks.