Make Basic firewalling as Factory Default

[Apachez]

I tried a few IPv6 related questions in this forum about a week ago but still no replies

How to configure VyOS to be used with IPv6 SLAAC + DHCP6-PD from ISP?

The VyOS in question is using 1.5-rolling and have the following interfaces setup: eth0: MGMT (only IPv4) eth1: WAN eth2: DMZ eth3: LAN The ISP uses SLAAC with /64 onlink and also provides a /56 as DHCPv6-PD (so you can setup /64 on DMZ, LAN etc of your VyOS). In the below example I will request one /64 per downlink interface (DMZ and LAN) from the ISP. The SLAAC (well RA) from ISP uses O-flag so DNS-servers are learnt through DHCPv6. I assume these commands should fix this (please let me…