1.2.8 -> 1.3.0 upgrade - NAT rules are gone

Hello. It seems i’m not very lucky with this upgrade. First, my putty sessions using public key authentication had to be replaced with a 2048 key (in linux, generating a 1024bit key works), now, when booting version 1.3.0 everything seems to be in the configuration except for NAT rules.
Anyone experienced this?
Thanks and regards.

One of the rules had ports ssh,http,https,8443,8080,3360 and “protocol tcp_udp” specified.

Loaded the configuration manually and got: "Destination NAT configuration error in rule 23: “ssh” is not a valid port name for protocol “udp”.
Replaced protocol tcp_udp for protocol tcp and everythings seems ok!

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.