Hi all,
I have a working setup with multiple Vyos routers and BGP/Evpn with vxlan. The setup is on the main site a trunk with all the vlan’s putting in a single vxlan interface (bridge eth1 and vxlan0 int.) and on a remote location on i do the same with bridge eth1 and vxlan int. At eth1 i connect a switch on the trunk so i can configure switchports in vlan’s This is working.
Now i have an idea for smal remote locations i put there a vyos unit with multiple eth(x) ports so i do not use a switch but configure the eth(x) ports in a vlan i need.
[trunk]–[eth1][Vyos][eth0]-----(vpn)-----[eth0][Vyos]–[eth1-vlan1],[eth2-vlan2],[eth3-vlan3]
is it posible?