i am trying to connect a user which is made in Radius and i have setup the setting of Radius in VyOS but i can not connect my user if i connect a radius user and i can this log in VyOS
eth1:: send [RADIUS(1) Access-Request id=1 <User-Name “vyotest”> <Calling-Station-Id “00:0c:29:73:6c:f3”> <Called-Station-Id “00:0c:29:a4:67:05”> <User-Password 0xa5160f2cfdfc697cc88a91c80897ff68>]
Jan 14 15:33:47 accel-pppoe[5645]: eth1:: recv [RADIUS(1) Access-Reject id=1]
Jan 14 15:33:47 accel-pppoe[5645]: eth1:: send [PAP AuthNak id=11 “Authentication failed”]
Jan 14 15:33:47 accel-pppoe[5645]: eth1:vyotest: vyotest: authentication failed
Jan 14 15:33:47 accel-pppoe[5645]: vyotest: authentication failed
Jan 14 15:33:47 accel-pppoe[5645]: eth1:vyotest: terminate
Jan 14 15:33:47 accel-pppoe[5645]: eth1:vyotest: lcp_layer_finish
Jan 14 15:33:47 accel-pppoe[5645]: eth1:vyotest: send [LCP TermReq id=225]
Jan 14 15:33:47 accel-pppoe[5645]: eth1:vyotest: auth_layer_finish
Jan 14 15:33:47 accel-pppoe[5645]: eth1:vyotest: auth_layer_finished
Jan 14 15:33:47 accel-pppoe[5645]: eth1:vyotest: recv [LCP TermAck id=e1]
Jan 14 15:33:47 accel-pppoe[5645]: eth1:vyotest: lcp_layer_finished
Jan 14 15:33:47 accel-pppoe[5645]: eth1:vyotest: pppoe: ppp finished
Jan 14 15:33:47 accel-pppoe[5645]: eth1:: lcp_layer_free
Jan 14 15:33:47 accel-pppoe[5645]: eth1:: auth_layer_free
Jan 14 15:33:47 accel-pppoe[5645]: eth1:: ccp_layer_free
Jan 14 15:33:47 accel-pppoe[5645]: eth1:: ipcp_layer_free
Jan 14 15:33:47 accel-pppoe[5645]: eth1:: ipv6cp_layer_free
Jan 14 15:33:47 accel-pppoe[5645]: eth1: send [PPPoE PADT 00:0c:29:a4:67:05 => 00:0c:29:73:6c:f3 sid=01c0 ]
Jan 14 15:33:47 accel-pppoe[5645]: eth1:: disconnected
Jan 14 15:33:47 accel-pppoe[5645]: eth1: recv [PPPoE PADT 00:0c:29:73:6c:f3 => 00:0c:29:a4:67:05 sid=01c0]