Install of 1.1.7 on New Super Micro board X10SDV-TP8F and raid-1

hardware
supermicro

#1

In case someone runs into an installation issue on newer Super Micro boards
Vyos would not recognize bios raided drives
When I set the drives as non raid ahci the system would see the drives but not write to them.
Setting the drives to IDE in the bios I was then able to get the system to install.
Vyos was able to create a raid group and move files over.


#2

Newer hardware supported only on 1.2.x
https://downloads.vyos.io/?dir=rolling/current/amd64


#3

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.