IPoE Server || Static IP || Radius

Hi Team,

I am trying to confg IPoE server end user using static ip and authentication radius web(username/password) just link mikrotik hotspot. but i don’t get ping in gateway config below.

set interfaces ethernet eth0 hw-id ‘bc:30:5b:f0:22:6c’
set interfaces ethernet eth1 hw-id ‘bc:30:5b:f0:22:6d’
set interfaces ethernet eth2 hw-id ‘bc:30:5b:f0:22:6e’
set interfaces ethernet eth3 hw-id ‘bc:30:5b:f0:22:6f’
set interfaces ethernet eth3 ip disable-arp-filter
set interfaces ethernet eth4 hw-id ‘00:1b:21:bd:73:bc’
set interfaces ethernet eth5 address ‘xx.xx.176.18/30’
set interfaces ethernet eth5 hw-id ‘00:1b:21:bd:73:be’
set interfaces loopback lo
set protocols static route 0.0.0.0/0 next-hop xx.xx.176.17
set service ipoe-server authentication mode ‘radius’
set service ipoe-server authentication radius dynamic-author key ‘xxxxxxx’
set service ipoe-server authentication radius dynamic-author port ‘3799’
set service ipoe-server authentication radius dynamic-author server ‘xx.xx.176.18’
set service ipoe-server authentication radius nas-identifier ‘BNG’
set service ipoe-server authentication radius nas-ip-address ‘xx.xx.176.18’
set service ipoe-server authentication radius preallocate-vif
set service ipoe-server authentication radius rate-limit enable
set service ipoe-server authentication radius rate-limit vendor ‘mikrotik’
set service ipoe-server authentication radius server xx.xx.176.10 key ‘xxxxxxxxx’
set service ipoe-server authentication radius source-address ‘xx.xx.176.18’
set service ipoe-server client-ip-pool name IPoE_Pool_1 gateway-address ‘192.168.10.1’
set service ipoe-server client-ip-pool name IPoE_Pool_1 subnet ‘192.168.10.0/24’
set service ipoe-server interface eth3 client-subnet ‘192.168.10.0/24’
set service ipoe-server interface eth3 mode ‘l2’
set service ipoe-server interface eth3 network ‘shared’
set service ipoe-server name-server ‘8.8.8.8’
set service ipoe-server name-server ‘8.8.4.4’
set service ssh access-control allow user ‘xxxxxx’
set service ssh port ‘17xx’
set system config-management commit-revisions ‘100’
set system conntrack modules ftp
set system conntrack modules h323
set system conntrack modules nfs
set system conntrack modules pptp
set system conntrack modules sip
set system conntrack modules sqlnet
set system conntrack modules tftp
set system console device ttyS0 speed ‘115200’
set system host-name ‘BNG’
set system ntp
set system syslog global facility all level ‘info’
set system syslog global facility protocols level ‘debug’

please guide me if anything wrong.