Hello there
I want to use LNS. but the operator wants us to connect with 4 ip on the LAC side. for example
10.1.1.1.1 password 1111
10.1.1.1.2 password 1111
10.1.1.1.3 password 1111
10.1.1.1.4 password 1111
how can i make this definition. also can i make more than one definition on the LNS side. like based on a profile.
There is an example of LNS/LAC PPPoE over L2TP — VyOS 1.5.x (circinus) documentation
Hi
i was read this document but i need more lns config
set vpn l2tp remote-access lns host-name ‘LAC’
set vpn l2tp remote-access lns shared-secret ‘test123’
just one i have 4 lns server
Several LACs can connect to the LNS using the same shared-secret
I don’t seem to understand something.
You can contact our sales team if you have some specific cases/requirements/limits.
Our operator gives more than one LNS 4 ip and password
We can enter a single one in vyos. I wonder if there is a way to enter this multi
10.1.1.1.1.1 password 1111
10.1.1.1.1.2 password 1111
10.1.1.1.1.3 password 1111
10.1.1.1.1.4 password 1111
In your example, the password is the same.
password same but ip different
LAC connects to LNS, not the other way around
Which IP/IP’s you configure on the LNS is up to you. One IP on ten IP’s.
I still do not understand the problem.
the operator we use has a /30 network via vlan
ex 10.10.10.0.0/30 VLAN-10
10.10.0.1 LAC
10.10.0.2 LNS (our side)
and we have 4 loopback ip
10.1.0.0.1/32
10.1.0.0.2/32
10.1.0.0.3/32
10.1.0.0.4/32
and loopback ip’s gateway 10.10.0.1
then there are 4 auth keys for the tunel.
10.2.0.1/32 secret 2210
10.2.0.2/32 secret 2210
10.2.0.3/32 secret 2210
10.2.0.4/32 secret 2210
that’s how the system works. How can I do this with vyos on a different router. I’m looking into it.
Contact our sales Contact Us – VyOS
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.