VRF and OSPF - vyos 1.3


Just wanted to check whether I am missing something; but I don’t think OSPF works inside a VRF. OSPFv3 seems to be ok (possibly as you can select interface rather than network). Maybe I am missing some config, but the OSPF works if I remove the VF from the interface.



@joelmoxey as of now VyOS is only supporting static route for VRF


Thanks @a.srividya, that clears that up. Now looking back at my logs I can see the adjacencies came up for OSPFv3 in VRF, but no routes were imported.