VyOS - Tunnelbroker - dynamic IPv4 --> 24/7 IPv6 tunnel


If have this running since 2012 and always wanted to write a How-To.
I’ve done this tonight, please have a look and let me know your thoughts / comments either here or on the blog or on the G+ community.



How can I setup VyOS when IPv6 connection is native.
My ISP is Comcast and I’m using an Arris modem - tm822g

Thank you.


Just as normal. The Interfaces do support IPv6 so in the end you do the same as with IPv4


Aqui lo mismo pero en español